ke21101-1405-003 fdk produces the multilayer chip inductors for high frequency, applying its advanced material technologies, simulation techniques and rf circuit design. fdk's multilayer chip inductors for high frequency surely satisfy customer needs. multilayer chip inductors for high frequency aml1005h (0402) type aml1005q (0402) type aml0603q (0201) type contents page electrical characteristics of aml1005h (0402) type .................................... 2 electrical characteristics of aml1005q (0402) type .................................... 3 electrical characteristics of aml0603q (0201) type .................................... 4 features,applications,part numbering system, shape & dimensions ........................................ 5 mechanical & environmental test ..................... 6 soldering condition ........................................... 7 precaution ........................................................ 7 packaging ......................................................... 8
http://www.fdk.co.jp 2 electrical characteristics of aml1005h (0402) type s.r.f. dc rated part number l[nh] toler- [mhz] resistance current 100mhz ance typ. [ ? ] [ma] typ. aml1005h1n0st 1.0 s 8 10 17 30 35 >10000 0.04 300 aml1005h1n2st 1.2 s 8 10 17 30 35 >10000 0.04 300 aml1005h1n5st 1.5 s 8 10 17 30 34 >10000 0.05 300 aml1005h1n8st 1.8 s 8 10 17 30 35 9500 0.05 300 aml1005h2n2st 2.2 s 8 10 18 30 33 8500 0.07 300 aml1005h2n7st 2.7 s 8 11 19 30 34 7500 0.08 300 aml1005h3n3st 3.3 s 8 11 18 30 36 6500 0.10 300 aml1005h3n9st 3.9 s 8 11 19 31 34 6200 0.11 300 aml1005h4n7st 4.7 s 8 12 20 32 35 5700 0.15 300 aml1005h5n6st 5.6 s 8 11 20 34 35 5200 0.16 300 aml1005h6n8jt 6.8 j 8 11 19 33 34 4500 0.19 250 aml1005h8n2jt 8.2 j 8 11 20 33 35 4000 0.20 250 aml1005h10njt 10 j 8 11 20 30 34 3700 0.25 250 aml1005h12njt 12 j 8 11 19 31 35 2900 0.25 250 aml1005h15njt 15 j 8 12 21 32 34 2500 0.31 250 aml1005h18njt 18 j 8 12 21 31 34 2300 0.32 200 aml1005h22njt 22 j 8 12 20 31 33 1900 0.35 200 aml1005h27njt 27 j 8 11 16 27 33 1700 0.49 200 aml1005h33njt 33 j 8 12 19 27 30 1680 0.62 200 aml1005h39njt 39 j 8 12 19 26 31 1650 0.65 150 aml1005h47njt 47 j 8 12 20 25 27 1300 0.80 150 aml1005h56njt 56 j 8 11 18 25 23 1250 0.85 150 aml1005h68njt 68 j 8 12 20 24 21 1150 1.00 150 aml1005h82njt 82 j 8 11 20 24 19 1000 1.60 100 aml1005hr10jt 100 j 8 11 16 13 900 2.00 100 q q typ. min. 100 100 300 800 1000 [mhz] [mhz] [mhz] [mhz] [mhz] inductance tolerance : (s= 0.3nh, j= 5%) 10 1000 100 10 1 100 1000 frequency[mhz] inductance vs frequency inductance[nh] 10000 12nh 56nh 100nh 3.3nh 10 60 50 40 30 20 10 0 100 1000 frequency[mhz] q vs frequency q 10000 56nh 100nh 12nh 3.3nh
http://www.fdk.co.jp 3 electrical characteristics of aml1005q (0402) type s.r.f dc rated part number l[nh] toler- [mhz] resistance current 100mhz ance typ. [ ? ] [ma] typ. aml1005q1n0st 1.0 s 9 11 34 40 >10000 0.04 300 aml1005q1n2st 1.2 s 9 11 34 40 >10000 0.04 300 aml1005q1n5st 1.5 s 9 11 34 40 >10000 0.05 300 aml1005q1n8st 1.8 s 9 11 34 40 >10000 0.05 300 aml1005q2n2st 2.2 s 9 11 34 40 >10000 0.07 300 aml1005q2n7st 2.7 s 10 12 34 40 9500 0.08 300 aml1005q3n3st 3.3 s 10 12 34 40 8200 0.10 300 aml1005q3n9st 3.9 s 10 12 34 40 7600 0.11 300 aml1005q4n7st 4.7 s 10 12 35 40 7500 0.12 300 aml1005q5n6st 5.6 s 10 13 35 40 6300 0.15 300 aml1005q6n8jt 6.8 j 10 13 35 40 5800 0.17 250 aml1005q8n2jt 8.2 j 10 14 35 40 5300 0.19 250 aml1005q10njt 10 j 10 14 35 40 4500 0.21 250 aml1005q12njt 12 j 10 14 35 40 3800 0.25 250 aml1005q15njt 15 j 10 14 35 40 3000 0.28 250 aml1005q18njt 18 j 10 14 35 40 2600 0.28 250 q q typ. min. 100 100 800 1000 [mhz] [mhz] [mhz] [mhz] inductance tolerance : (s=0.3nh, j=5%) 10 30 25 20 15 10 5 0 100 1000 frequency[mhz] inductance vs frequency inductance[nh] 10000 15nh 6.8nh 3.3nh 6.8nh 15nh 3.3nh 10 60 50 40 30 20 10 0 100 1000 frequency[mhz] q vs frequency 10000 q
http://www.fdk.co.jp 4 electrical characteristics of aml0603q (0201) type 35 30 25 20 15 10 5 0 frequency[mhz] inductance vs. frequency inductance[nh] 10 1 100 1000 10000 3.3nh 10nh 15nh 22nh 40 35 30 25 20 15 10 5 0 frequency[mhz] q vs. frequency q 10 1 100 1000 10000 3.3nh 10nh 15nh 22nh s.r.f dc rated part number l[nh] toler- [mhz] resistance current 100mhz ance typ. [ ? ] [ma] typ. aml0603q1n0st 1.0 s 4 6 16 21 >10000 0.07 300 aml0603q1n2st 1.2 s 4 6 16 21 >10000 0.07 300 aml0603q1n5st 1.5 s 4 6 18 23 >10000 0.07 300 aml0603q1n8st 1.8 s 4 6 18 23 >10000 0.10 300 aml0603q2n2st 2.2 s 4 6 18 22 >10000 0.12 200 aml0603q2n7st 2.7 s 4 6 19 22 9500 0.14 200 aml0603q3n3st 3.3 s 4 6 19 22 9000 0.17 200 aml0603q3n9st 3.9 s 4 6 19 22 7900 0.20 150 aml0603q4n7st 4.7 s 4 6 18 21 7500 0.39 150 aml0603q5n6st 5.6 s 4 6 18 21 6900 0.40 150 aml0603q6n8jt 6.8 j 4 6 18 21 6400 0.46 100 aml0603q8n2jt 8.2 j 4 6 17 20 6000 0.54 100 aml0603q10njt 10 j 4 6 17 20 5100 0.63 100 aml0603q12njt 12 j 4 6 17 20 4500 0.70 100 aml0603q15njt 15 j 4 6 16 19 3500 1.30 100 aml0603q18njt 18 j 4 6 16 18 3000 1.50 100 aml0603q22njt 22 j 4 6 16 17 2300 1.70 100 aml0603q27njt 27 j aml0603q33njt 33 j AML0603Q39NJT 39 j aml0603q47njt 47 j q q typ. min. 100 100 800 1000 [mhz] [mhz] [mhz] [mhz] inductance tolerance : (s=0.3nh, j=5%) under development
http://www.fdk.co.jp 5 features aml 1005h (0402) type wide range inductance value from 1 to 100nh high q characteristics high reliability by monolithic structure aml 1005q (0402) type ultra high q characteristics high reliability by monolithic structure applications mobile telephones, phs, bluetooth rf cricuits part numbering system aml 1005 h 22n j t packaging t)tape & reel tolerance s=0.3nh,j=5% nominal inductance example) 2n2:2.2nh , 22n:22nh characteristic code h : wide inductance range, q:ultra high q characteristics physical dimension 1005 ( 1.0x0.5 mm ) ( 0.039x0.020 inch ) type name aml: advanced multilayer chip inductor(l) shape & dimensions 1.0 0.1 1.0 0.1 0.5 0.1 0.5 0.1 0.25 0.1 0.25 0.1 direction maker 0.5 0.1 0.5 0.1 direction maker direction maker 0.6 0.03 0.3 0.03 0.3 0.03 0.15 0.03 aml1005h aml1005q aml0603q unit : mm ( inch ) aml 0603q (0201) type wide range inductance value from 1 to 47nh high q characteristics
http://www.fdk.co.jp 6 mechanical & environmental test item specification test methods and remarks resistance to flexure of substrate solderability resistance to soldering damp heat thermal shock loading at high temperature loading under damp heat temperature characteristic no mechanical damage at least 75% of terminal electrode must be covered with new solder. no mechanical damage remaining terminal electrode : 70% min. no mechanical damage l within 10% q within 20% no mechanical damage l within 10% q within 20% no mechanical damage l within 10% q within 20% no mechanical damage l within 10% q within 20% l within 10% solderd chip on pc board is to be bent down to 2mm. pre-heat at 160 ? c for 2 to 3 minutes. soak into the melted solder bath of 2305 ? c for 41 seconds. pre-heat at 160 ? c for 2 to 3 minutes. soak into the melted solder bath of 2605 ? c for 100.5 seconds. expose to 60 ? c, 90rh% for 500 hours. measure at room temperature in 2 hours. solder the sample on pc board. expose to 100 cycles of +125 ? c for 60 minutes and 55 ? c for 60 minutes. measure at room temperature in 2 hours. apply the rated current under the exposure to 125 ? c for 500 hours. measure at room temperature in 2 hours. apply the rated current under the exposure to 60 ? c, 90rh% for 500 hours. measure at room temperature in 2 hours. measure l change at the temperature of 25 ? c and +85 ? c with reference to l at 20 ? c. 45 20 45 weight r230 0.8t unit : mm environmental test mechanical test
http://www.fdk.co.jp 7 soldering condition precaution recommended land dimensions(mm) flow soldering reflow soldering a 0.3 ~ 0.5 0.25 ~ 0.35 b 0.4 ~ 0.5 0.25 ~ 0.35 c 0.3 ~ 0.4 0.25 ~ 0.35 recommended condition for soldering (max 260 ? c 10seconds) 40 150 10 230+20/ 10 90 30 15 time (s) temperature ( ? c) ? conditions for soldering temperature should be determined after the confirmation that beforehand soldering tests are not abnormal. 1. application 1-1. please be sure to preheat before flow soldering or reflow soldering. 1-2. pc board mounted the inductor must be care not to give any physical stress to it. 1-3. the appropriate cleaning solution must be selected when cleaning the pc board after the inductors are mounted. 2. storage 2-1. the ambient temperature must be kept below 40 ? c and below 70%rh, the inductor should be used within 6 months from the day of delivery. 2-2. the packaging material should be kept where no organic gases with chlorine or sulfur existed in an air. ab c b
8 http://www.fdk.co.jp packaging 1. standard quantity 2. material 3. taping dimensions unit : mm (inch) 1) aml1005h, aml1005q 4. leader and blank portion unit : mm (inch) type thickness standard quantity (pcs) [mm](inch) paper tape aml1005h, aml1005q 0.5 10,000 aml0603q 0.3 15,000 base tape sprocket hole chip cavity top tape mark chip 80mm(3.15 inches)or more 80mm(3.15 inches) or more 150mm(5.91 inches) or more direction of tape feed blank portions chip cavities blank portions leader chip filled tape : card board carrier tape reel : polystyrene (included carbon) 0.8max 0.65 0.1 1.75 0.1 8.0 3.5 0.05 1.5 +0.1 0 4.0 0.1 2.0 0.1 sprocket hole chip cavity 1.15 0.1 paper tape 8mm wide (0.312 inches wide) 2) aml0603q 0.8max 0.35 0.03 1.75 0.1 8.0 0.1 3.5 0.04 1.5 +0.1 -0 4.0 0.08 2.0 0.04 0.65 0.1 sprocket hole chip cavity paper tape 8mm wide (0.312 inches wide)
9 http://www.fdk.co.jp 6. top tape strength 7. inner box dimensions (mm) 8. outer box dimensions (mm) 5. reel size unit : mm (inch) 2.0 0.8(0.079 0.031) 13.0 0.5( 0.512 0.020) 21.0 0.8 ( 0.0827 0.031) 60(2.36) or more 180 2.0 ( 7.09 0.079) r0.04 less than1.5(0.059) 10 1.5 (0.394 0.059) reel label fdk.p.no fdk part number part.no user part number lot.no lot number quantity fdk corporation top tape base tape 0~15? l h w l h w the top tape requires a peel-off force of 0.1~0.7n in the direction of the arrow as illustrated below. lwh 1853 723 1853 max 6 packing quantity outer box label fdk.p.no fdk part number part.no user part number lot.no lot number quantity fdk corporation lwh 410 210 210 5 packing quantity
fdk web site electronics sales div. 5-36-11, shinbashi, minato-ku, tokyo 105-8677, japan (hamagomu bldg.) tel: (81)-3-5473-4685 fax: (81)-3-3431-9436 u.s.a. fdk america, inc. corporate office 2270 north first street, san jose, california 95131-2022, u.s.a. tel: (1)-408-432-8331 fax: (1)-408-435-7478 fdk america, inc. boston office 411 waverley oaks road, suite 324, waltham, massachusetts 02452-8437, u.s.a. tel: (1)-781-899-7700 fax: (1)-781-899-7701 fdk america, inc. san diego office 6540 luck blvd suite c274 san diego, california 92121-2766, u.s.a. tel: (1)-858-558-8368 fax: (1)-858-558-6005 europe fdk electronics gmbh heerdter lohweg 89, 40549, d?sseldorf, germany tel: (49)-211-591574 fax: (49)-211-593549 fdk electronics uk limited suite 4c celect house 12a fairbairn road, kirkton north livingston eh54 6ts, scotland, united kingdom tel: (44)-1506-467981 fax: (44)-1506-467982 asia fdk hong kong ltd. suite 1601-1602, tower 3, china hong kong city, 33 canton road, tsim sha tsui, kowloon, hong kong tel: (852)-27999773 fax: (852)-27554635 fdk singapore pte., ltd. 4, leng kee road, #06-07/08 sis building, singapore. 159088, republic of singapore tel: (65)-472-2328 fax: (65)-472-5761 for improvement of its products, fdk reserves the right to change specifications without prior notice to customers. *printed on 100% recycled paper. *printed using soy-based inks.
|
